Exotronic 4 x 200W Solar Panel with Wiring Kit to suit Victron SmartSolar MPPT 100/50 Charge Controller Top Sell

Exotronic 4 x 200W Solar Panel with Wiring Kit to suit Victron SmartSolar MPPT 100/50 Charge Controller, 5 Year Warranty.

Pack Includes:

• 4 x Exotronic 200W Fixed Monocrystalline Solar Panel, Exo-SP-F4-200
• 4 x Adjustable Black Aluminium Solar Panel Bracket, Pack of 4, RP-FPM-01_Black
• 2 x FixTech Fix15 Adhesive Sealant 290ml Cartridge Black, FixT-MSP15BK
• Cable Kit from Solar 4 RV to suit Victron SmartSolar 100/50 Charge Controller

Exotronic 200W Fixed Monocrystalline Solar Panel.

Using 23% efficient Trina monocrystalline passivated emitter rear contact (mono-PERC) square cut cells and the latest 9-wire bus-bar low-loss design, these panels achieve a high efficiency with a positive power tolerance.

PERC cells provide better performance in low light applications compared to traditional monocrystalline silicone designs as some of the light that passes through the cell is bounced back and converted into electricity.

The 9-wire busbar decreases the resistance of the module and carries current evenly over the whole surface of the cells to ensure that all there are minimal power losses within the module and significantly reduces uneven cell heating and hot spots.

The anodised aluminium frame is further protected by a black protective coating and is only 25mm thick to assist a low-profile design and reduce the weight of the module while still giving good rigidity to protect the module from vibrational and torsional stresses.  The tempered glass provides high resistance to impact damage.  Low-iron high transmissivity glass is used to provide excellent low light performance.

• Salt mist  and ammonia resistant
• Wind load resistant – 2400 Pascal
• Snow load resistant – 5400 Pascal

Adjustable Black Aluminium Solar Panel Bracket, Pack of 4 

Strong but lightweight aluminium brackets including the screws and bolts are an excellent way of fixing your glass-fixed solar panels to your substrate.

Normal Mounting Method (it is the duty of the installer to ensure this method is appropriate for the panel and roof type):

• Attach brackets to solar panel
• Place panel on substrate and mark hole locations
• Pre-drill holes
• Clean bracket and substrate using iso-propyl alcohol until clean and dry
• Use an appropriate adhesive to cover completely underneath the bracket
• Screw bracket in place
• Cover base of bracket and tops of screws with adhesive

FixTech Fix15 Adhesive Sealant 290ml Cartridge Black.

FixSeal MSP15 in colourfast black.A high quality, single-component flexible adhesive joint sealant with GL Approval that is suitable for above and below the waterline applications.

Based on a Modified Polymer®, it is chemically neutral and fully elastic. Suitable for use in low movement structural joints in marine, it is also suitable for automotive, aerospace, and construction applications where a tough flexible adhesive sealant is required.
May be overpainted with water based paints.
Non-yellowing white is also available.
Not suitable for flexible solar panels, see Fix8 or a VHB tape instead.

Characteristics:

• High bond strength on a wide variety of substrates
• Non Yellowing white, and colourfast black
• High performance mechanical properties
• Flexible elastic rubber; movement accommodation up to 20%
• Assessed under criteria of NOHSC Australia and considered as non-toxic, Certificate No.2146.
• No bubble formation within the sealant
• Primerless adhesion (except where capillary water pressure can occur)
• Easy to tool and finish
• Excellent extrudability and UV resistance
• Ecological advantages- free from isocyanates, solvents, halogens and acids
• Minimal health and safety considerations
• Can be wet on wet painted with all water based paints and many other systems*
• No staining of porous materials such as natural stone, granite, marble, etc.

Specifications:

• Flexible elastic rubber; movement accommodation up to 20%

Cable Kit from Solar 4 RV to suit Victron SmartSolar 100/50 Charge Controller

• 8m x Solar Cable PV1-F 6mm2 twin, thin sheath
• 1 x Combined switch & circuit breaker 60A heavy duty manual reset waterproof
• 2 x 16mm² Copper Lug M6 – Suits 6 B&S/AWG
• 2 x 16mm² Copper Lug M8 – Suits 6 B&S/AWG
• 2 x 16mm² Copper Lug M10 – Suits 6 B&S/AWG
• 1 x MC4 ‘h’ Branch Solar Connector Pair
• 5 x MC4 Solar Connector Pair
• 1m x Cable Marine (tinned copper) TCW twin core & sheath 6 B&S – 13.5mm3
• 1 x 16mm² Copper Link – Suits 6 B&S/AWG
• 1m x 12-4mm Heat Shrink – Black, 3:1, Twin/Dual Wall – 1m Lengths