DCS 24V 100Ah Trolling Motor Bundle with Victron Blue Smart IP67 12A Charger Best Price

DCS 24V 100Ah Trolling Motor Bundle with Victron Blue Smart IP67 12A Charger, 4 Year Warranty.

Pack Included:

• DCS 24V 100Ah Lithium Battery, DCS-24V-100Ah
• Victron Blue IP67 Smart Charger 24/12, 1 Output, BPC241213016

DCS 24V 100Ah Lithium Battery

All DCS batteries now feature their comprehensive Bluetooth System available on both Android and Apple operating systems shows a lot of cool things.

Features:

• Cell status showing real time cell balancing operation
• BMS MOSFET temperature ( great info when your winching or running a large inverting load or your trolling motor to know how hard your pushing the electronics)
• SOC% estimate (using impedance tracking the App learns the SOC after the first 10 cycles)
• Battery pack voltage and cycle count
• Amp meter showing charge and discharge current
• Connectivity distance up to 10m
• Now there is no need to install battery monitors or shunts in boats, campers or vehicles. You have all the info you need at your finger tip.
• The SOC estimate is accurate on single batteries, the more batteries that are expanded in parallel the less accurate the SOC becomes.
• This free application provides the perfect tell-tale about the battery packs state of health as it ages
• Assists installers & integrators to quickly diagnose any system issues

Specifications:

• BMS (built-in): Automatic cell balancing, over discharge/charge
• Cycle Performance: 2500 cycles @ 100%DOD
• LCA: 1000
• Engine Cranking: Max 3000W starters motors
• Case: ABS (flame retradent plastic)
• Terminals: Top mount M8 stainless / copper
• Parallel Connection: Yes

Victron Blue IP67 Smart Charger 24/12, 1 Output. 

The Blue Smart IP67 Waterproof Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP67 Waterproof Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.

The battery is charged, smartly… to perfect condition:

The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life.

Recovery of deeply-discharged ‘dead’ batteries:

Unlike other brands, the Blue Smart IP67 Charger Waterproof will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.

Check the status of your battery remotely:

Blue Smart IP67 Charger Waterproof is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app.

Bluetooth Smart enabled:

The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update
the charger when new features become available. With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers.

Completely encapsulated: waterproof, shockproof and ignition protected:

Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminium and the
electronics are moulded in resin.

The highest efficiency ever:

Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard.

Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage:

The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used.

Storage Mode: less maintenance and aging when the battery is not in use:

The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.

Also charges Li-ion (LiFePO髢ｳ? batteries:

LiFePO髢ｳ?batteries are charged with a simple bulk – absorption – float algorithm.

Protected against overheating:

Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail.

Two LEDs for status indication:

• Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off)
• Green LED: power on